Snowflake Hueforge bookmark

Project: snowflake 1 bookmark.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x192.51mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5This print uses 4 un