Snowman (hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PETG JAYO White Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Beige At layer #20 (1.68mm) swap to White for the rest.