Thingiverse
SnowRunner logo
von ippeppe
13
Downloads
11
Likes
0
Makes
This is my own design from the SnowRunner game logo.
Some of the smaller details (spikes) will surely come off, but theres alot of them, so don't worry.
I printed this with Ender 3 + Cura, using 140% scale to fill almost the whole bed. The Dynamic Quality 0.16 is mainly default, except:
Top Thickness: 3mm
Print Speed: 100mm/s
Support: None
Build Plate Adhesion Type: None
Infill Density: 20%
The truck in the last picture is from boyncygoths superb design
https://www.thingiverse.com/thing:944086
and the setting is my own.
Paint is airbrushed by me.
Some of the smaller details (spikes) will surely come off, but theres alot of them, so don't worry.
I printed this with Ender 3 + Cura, using 140% scale to fill almost the whole bed. The Dynamic Quality 0.16 is mainly default, except:
Top Thickness: 3mm
Print Speed: 100mm/s
Support: None
Build Plate Adhesion Type: None
Infill Density: 20%
The truck in the last picture is from boyncygoths superb design
https://www.thingiverse.com/thing:944086
and the setting is my own.
Paint is airbrushed by me.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!