Thingiverse

SnowSpinner

by SRex

9 Downloads

7 Likes

0 Makes

This is the SnowSpinner a print in place bearing snowflake built with BlocksCAD software. This is the first thing I ever created with the BlocksCAD software. Attached is my xml "block" file that shows how I build this.

Need to print this with support touching build plate turned on.

I printed mine with a 0.2mm layer height and a 50% infill with PLA. This took about 2 hours to print.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

print-in-place design · supports needed · 0.20mm layers

Print-in-place Supports required Hardware needed

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Layer height

0.2 mm

Est. print time

2 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does SnowSpinner need supports when printing?

Nope — SnowSpinner is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print SnowSpinner?

According to the design notes, SnowSpinner takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SnowSpinner available in?

SnowSpinner is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is SnowSpinner free to download?

Yes, SnowSpinner is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

SnowSpinner

Add to Collection