Soil Moisture Sensor with Battery

A simple Soil Moisture sensor. This casing can hold either a Wemos D1 mini or a ESP32 C3/S3 mini boards. I used home assistant and ESPHome Builder to install and configure the microcontroller, however you can use micro python or Arduino IDE, your choice. ESPHome Code: ```sensor: - platform: adc pin: A0 #Replace this with your GPIO pin name: &#34;Soil Moisture Sensor 1&#34; unit_of_measurement: &#34;%&#34; icon: &#34;mdi:water-percent&#34; accuracy_decimals: 1 update_interval: 3s filters: - calibrate_linear: #Replace the values below with the ones you found. # The first number is your DRY voltage, which maps to 0% moisture. - 0.50 -> 0.0 # The second number is your WET voltage, which maps to 100% moisture. - 0.26 -> 100.0 # The clamp filter ensures the output never goes below 0% or above 100%. - clamp:<