Thingiverse
Solar Finder
by CS2000
11
Downloads
6
Likes
0
Makes
# Sun Finder Scope for Telescopes
The dovetail is the standard 34mm x 60° and can be mounted in a dovetail holder or with an 1/4'' UNC photo screw.
The screen can be cut from some semi transparent plastic (yogurt cup or similar).
FOV: ca. 18°
### Partlist
* 8x Screws M3x12mm
* 6x Set Screws M2 (not necessary, if caps are a tight fit.)
* 1x Screen D:40mm
## Other parts (if not 3d printed)
* 2x Aperture Aluminium 1mm, D:40mm, Pinhole:1mm
* 1x PVC Pipe L:110mm, OD:40mm, ID:36mm
* 2x Metal Rings L:6mm,OD:50mm: ID: 46mm
The dovetail is the standard 34mm x 60° and can be mounted in a dovetail holder or with an 1/4'' UNC photo screw.
The screen can be cut from some semi transparent plastic (yogurt cup or similar).
FOV: ca. 18°
### Partlist
* 8x Screws M3x12mm
* 6x Set Screws M2 (not necessary, if caps are a tight fit.)
* 1x Screen D:40mm
## Other parts (if not 3d printed)
* 2x Aperture Aluminium 1mm, D:40mm, Pinhole:1mm
* 1x PVC Pipe L:110mm, OD:40mm, ID:36mm
* 2x Metal Rings L:6mm,OD:50mm: ID: 46mm
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
