Thingiverse
Solar Light Stand
von richhemmings
0
Downloads
0
Likes
0
Makes
Replacement part for solar light.
Item: S8183
EAN: 5059340322827
2 versions included - 1 that replicates the original, and a simplified model.
Print the part led down and use a raft if you have bed adhesion issues. Will require support as the tube is slightly shorter than the arms.
The replicated version has a tube ID of 18mm, but printed slightly undersized on my printer and so the simplified version has a 18.5mm ID.
The original version has a slight flaw, which you may be able to live with -- where I swept the path of the arm, the holes are slightly toe-in which will give the pin a slight angle. I don't have the lamp to see if this is a problem. This isn't an issue on the simplified version and I'd be happy for any pointers of how I could have avoided this error!
Item: S8183
EAN: 5059340322827
2 versions included - 1 that replicates the original, and a simplified model.
Print the part led down and use a raft if you have bed adhesion issues. Will require support as the tube is slightly shorter than the arms.
The replicated version has a tube ID of 18mm, but printed slightly undersized on my printer and so the simplified version has a 18.5mm ID.
The original version has a slight flaw, which you may be able to live with -- where I swept the path of the arm, the holes are slightly toe-in which will give the pin a slight angle. I don't have the lamp to see if this is a problem. This isn't an issue on the simplified version and I'd be happy for any pointers of how I could have avoided this error!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!