Solder Roll Holder

Are you tired of your solder roll just rolling around everywhere while you are trying to work on electronics? well this is your solution to that very specific problem! you have to print one base part and 2 rolling beams. The roll's diameter shouldn't be bigger than 55mm, and it's length should be less than 50mm, but you can scale the print accordingly. I used a layer height of 0.2mm on a 0.4mm nozzle without any supports, and it worked fine, but your experience may vary (i used a Bambu Lab A1 Mini)You can find it here: https://cad.onshape.com/documents/c03320a9d14620097d2fef3b/w/17832667a07e1ce4c0585c81/e/5f202a579d720bad16ef51d0?renderMode=0&uiState=669fae450856701150507d1f