Solo Leveling Igris Glow

You have to set your min. layer height to 0,06 - Printer should be calibrated for good Results Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm The Model is 146.8x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.5mmThe Max Depth is 4.1mm and the Actual Depth is 3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Glow Blue Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 4.8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.74mm) swap to Red At layer #15 (1.22mm) swap to Glow Blue At layer #27 (2.18mm) swap to Jade White for the rest.