Solo Leveling Manwha hueforge

Solo Leveling Manwha hueforgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.4mm and the Actual Depth is 3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4.2 PLA Bambu Lab Basic Gold Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 4.8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #19 (1.54mm) swap to Red At layer #21 (1.7mm) swap to Gold At layer #24 (1.94mm) swap to Jade White for the rest.