Slicer Discord
Somfy remote shade controller – 3D printable model from Thingiverse Thingiverse

Somfy remote shade controller

19 Downloads
24 Likes
0 Makes
Go to Model
There is a newer version of this thing here:
https://www.thingiverse.com/thing:3714544


If you own a shade or awning or curtain controlled by a Somfy remote control, and would like to control it from anywhere in the world. This is the gadget for you.

It is a simple box with a servo that pushes the buttons. In my case it controls shades in my house. The heart is an Adafruit HAZZAH ESP8266 breakout board. https://www.adafruit.com/product/2471
This board allows you to use a web browser to control it.

The "pusher" is glued using 5 minute epoxy to the servo horn. It is powered with a 5 volt wall wart. The clip is used to hold the servo in. I use a clip because the servo needs to come out in order to put the "Somfy remote" into the unit. The HAZZAH is fastened to the box using double sided sticky tape.

Once built and running you will have to determine the ip address of the HAZZAH and then use a web browser to access the web page designed into the code that is embedded into th
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection