Sonic Hueforge

Please note there are 5 filaments, remember to configure and change your spools correctly with an AMS. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 126.61x225mm in size You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #0041cc PLA+ Sunlu Blue Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Other similar coloured filaments will work well.Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Cyan At layer #16 (1.36mm) swap to RedBorder Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White for the rest.