Thingiverse

SPACE SHUTTLE

by Kmobrain

2.4k Downloads

2.1k Likes

17 Makes

Go to Model

This profile is deactivated for the moment, my other models are available on my other platforms: https://linktr.ee/kmobrain

UPDATES

- 30-05-22 : Adding windows after forgetting...

FR :

J'ai réalisé le Modèle de la Space shuttle à l'échelle 1:200 pour faire une petite collection des lanceurs à échelle équivalente.
Elle fait environ 28 cm de haut pour 18 cm de large.
Je l'ai imprimé en environ 40 heures.
il faut environ 450g de filament

ENG :

I made the Model of the space shuttle on a scale of 1:200 to make a small collection of launchers on an equivalent scale.
It is about 28 cm high for 18 cm wide.
I printed it in about 40 hours.
you need about 450g of filament

Others Models :

Ariane 5 : https://bit.ly/39AJ2mS
Vega : https://bit.ly/3pC05uv
Falcon 9 Block 5 : https://bit.ly/3tf4eqg
Falcon 9 Crew Dragon : https://bit.ly/3ctseQO
Falcon Heavy : https://bit.ly/3anZpT5
Saturn 5 : https://bit.ly/3ozJE0g
Long March 2 / CZ-2D : https://bit.ly/3ajANLc
Starship : https://bit.ly/3w11TPY
En

Fuse launcher nasa Orbiter rocket shuttle space Space Shuttle Fuse launcher nasa Orbiter rocket shuttle space Space Shuttle Fuse launcher nasa Orbiter rocket shuttle space Space Shuttle

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, Polycarbonate

Est. print time

40 h

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Kmobrain also publishes on

20 additional models across 1 more platforms

MakerWorld

20 models

♥ 10,633 ↓ 19,520 ⚒ 9,010

Frequently Asked Questions

Does SPACE SHUTTLE need supports when printing?

Yes, SPACE SHUTTLE will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print SPACE SHUTTLE?

According to the design notes, SPACE SHUTTLE takes approximately 40 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SPACE SHUTTLE available in?

SPACE SHUTTLE is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is SPACE SHUTTLE free to download?

Yes, SPACE SHUTTLE is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

2 Suggestions

SPACE SHUTTLE

Similar Models

Add to Collection