Space shuttle with stand

There are two versions - with and without engraving on both sides. I designed this model for 0,4mm nozzle and layer hight 0,2mm.

Stand should be attached on the bottom - there is 5mm hole. At the end of the model there are five holes. Three of them with diametter 2,4mm for main engines and two with diameter 2,0mm for smaller engines. When it doesn't fit, just grind a little material from holes or engine fitting. The fitting should be tight, so no glue is needed. Shuttle itself should be printed in "wings on the bed" orientaion. Stand should "Lay flat" on the bed, and withstand about 0,5kg bending in use.

The idea of this model came from my young sister, because she's fascinated about US space shuttle program. If you like this model, please enjoy :)