Space Sphynx

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can adjust the X and Y but the Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Matte Ash Gray Transmission Distance: 1.5PLA BambuLab Basic Purple Transmission Distance: 2.6PLA BambuLab Basic Green Transmission Distance: 2PLA BambuLab Matte Marine Blue Transmission Distance: 0.5PLA BambuLab Matte Mandarin Orange Transmission Distance: 3PLA BambuLab Matte Ice Blue Transmission Distance: 3.5This print uses 7 unique filaments. Substitute to suit your needs. Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Ash GrayAt layer #9 (0.8mm) swap to PurpleAt layer #12 (1.04mm) swap to BambuLab GreenAt layer #15 (1.28mm) swap to Marine BlueAt layer #21 (1.76mm) swap to Mandarin OrangeAt layer #25 (2.08mm) swap to Ice Blue for the re