SPACEBALLS "THE HUEFORGE"

SPACEBALLS "THE HUEFORGE"Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 245x183.75mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Gray At layer #14 (1.2mm) swap to Grey At layer #19 (1.6mm) swap to Jade White for the rest. Boost Me