Spacer 1

Torque transferring spacer to reinforce StoraBrollan's Logitech Momo Force hub replacement. It will allow the steering angle limiter to remain aligned if the hub fails between the force feedback gear and steering wheel, to avoid over-rotation damage to the wheel angle potentiometer.

Installs by replacing the m3x20mm screws with longer screws, which seat against a 39mm diameter metal washer that fits into the large end of the hub. The spacer has a 2mm gap to the washer to allow compression force on the hub.

The washer in the photos has notches to fit in the original hub for repair or reinforcement. For the original hub a larger diameter prototype spacer was made by cementing 3/4" PVC pipe into 1" PVC pipe to make a shorter 18mm spacer, a 1"x1/2" PVC bushing could also be used, or the 3D file could be modified to make this.