Spaceship #3 HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Sunlu HS Black Transmission Distance: 0.1 PLA Elegoo Rapid+ Red Transmission Distance: 4.6 PLA Sunlu HS Yellow Transmission Distance: 6.5 PLA Sunlu HS White Transmission Distance: 6.1This print uses 4 unique filaments Swap Instructions: Start with Bla