spamf bolt action slide

1/1/21 Added a reinforced version as well as a new print orientation. These should make it stronger and not break as easily. Print with the screw holes on the build plate

A slide to turn your falconfire, sharpfire, or spamf into a bolt action thing following this overview. https://youtu.be/W5WCkK8xd9k

Print it at 100% infill with the screw holes on the build plate. Smaller layer lines are recommended as well as everything else possible for max durability.

Printing a couple of spares is recommended in case it breaks on the field.
Not rated for 12kg and up. It flexed too much at a 12 kg worker spring to catch and eventually shattered. The guides also broke off after dry firing from the impact.

It requires two nerf sized screws. A washer, bolt, and nuts are needed for the bolt hinge. (I just used what fit). The washer goes through the bolt and into the slot. There is room for the bolt head in front of that. Behind the washer goes the nuts to be glued into the pvc for the bolt