Thingiverse
Spanner Nut Socket, Yamaha, 42mm
von ethanJones743
2
Downloads
6
Likes
0
Makes
Spanner nut socket for Yamaha steering head nuts, 42mm.
This tool can be used to disassemble/reassemble the steering head bearings on Yamaha motorcycles without buying specialty tools.
The exterior of the tool is to be used with a 34mm socket wrench.
In my case I needed to tighten to 38 lb/ft, and this held up being printed in PLA with 3 perimeters and 15% infill with a 0.6mm nozzle.
For bikes such as the Tracer 900, MT-09, FJR1300. May fit others as well.
Replaces Yamaha tool part numbers:
90890-01403
YU-A9472
This tool can be used to disassemble/reassemble the steering head bearings on Yamaha motorcycles without buying specialty tools.
The exterior of the tool is to be used with a 34mm socket wrench.
In my case I needed to tighten to 38 lb/ft, and this held up being printed in PLA with 3 perimeters and 15% infill with a 0.6mm nozzle.
For bikes such as the Tracer 900, MT-09, FJR1300. May fit others as well.
Replaces Yamaha tool part numbers:
90890-01403
YU-A9472
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
