MakerWorld
Hueforge & Lithophane
Go to Model
Spartan Poster Hueforge
38
Downloads
46
Likes
22
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100.2x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mm Filaments Used:PLA BambuLab BasicBlack Transmission Distance: 0.3PLA BambuLab Basic Jade White Transmission Distance: 0PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Matte Jeans Red Transmission Distance: 0This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions:Start with BlackAt layer #5 (0.48mm) swap to Jade White At layer #7 (0.64mm) swap to BeigeAt layer #20 (1.68mm) swap to Jeans Red for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![Helmet [Spartan] HueForge](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS7b5299c7927d2e%2Fdesign%2F2025-02-11_a622bec272079.jpg&w=400&h=300)
