SPD Red Ranger Helmet

SPD Red Ranger Helmet Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268 Uses 8x2mm Magnets, 22 in total. - Be sure to use the magnets in the BOM as they were tested and work properly. Helmet Main has painted supports as the prime tower is 100% needed for a clean print and can not fit without the custom supports. The lens I included can be used as a templet for the Face Shield or for display.For cosplaying Lens I recommend - https://www.amazon.com/gp/product/B0D2NHXCLV/ref=ox_sc_act_title_2?smid=A1U6SLB6T92CWN&th=1Most people seem to buy this one - https://www.amazon.com/gp/product/B002VECKRO/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1Once mine come in I will let you know how they perform. The side lights were made to replicative the original Power Rangers helmet car light look. This took some time to replicate correctly. Using Red Transparent Filament and the settings I provide in the Print Profile you to can replicate the same look. <a target