Thingiverse
Speaker Box
von Nichsen
17
Downloads
11
Likes
0
Makes
# My new Surround Speaker
- Print Things Upside down !
- Use a primer before real paint layer
- I used threaded bushes/fusible nuts
- Use wood or other material for the sides in 10x15 cm
- The speaker itself is: "Lavoce FAN030.71" it's a 3" fullrange speaker at 8 Ohm
- I used some jacks with screw and plug connection
- There is an additional fiel to cover the speaker front and screws
- The rear part has got some holes to screw it anywhere ;-)
The original Fusion360 file is attached if you want to customize my design.
Pleas feel free to give me your questions and feedback ;-)
If you really like my design, feel free to support me on Ko-fi: https://ko-fi.com/nichsen 😊
- Print Things Upside down !
- Use a primer before real paint layer
- I used threaded bushes/fusible nuts
- Use wood or other material for the sides in 10x15 cm
- The speaker itself is: "Lavoce FAN030.71" it's a 3" fullrange speaker at 8 Ohm
- I used some jacks with screw and plug connection
- There is an additional fiel to cover the speaker front and screws
- The rear part has got some holes to screw it anywhere ;-)
The original Fusion360 file is attached if you want to customize my design.
Pleas feel free to give me your questions and feedback ;-)
If you really like my design, feel free to support me on Ko-fi: https://ko-fi.com/nichsen 😊
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
