Thingiverse
SpeedCubeReview 3D Logo
door ShawnBoucke
1
Downloads
0
Likes
0
Makes
This is a 3D model based off of my SpeedCubeReview.com logo. What is its purpose?... You decide.
The puzzle prints relative to a 45mm cube. If you want it to be more like a standard 56mm print at about 125%.
If you print at the 45mm size you MUST print at least 0.2mm in detail as 0.3mm will result in the supports under the R being too thick to remove. I position the text on top when printing and ironed the top layer as that has the most detail.
If you print this please tag me on Instagram as I would love to see how many people add this to their cube collection!
The puzzle prints relative to a 45mm cube. If you want it to be more like a standard 56mm print at about 125%.
If you print at the 45mm size you MUST print at least 0.2mm in detail as 0.3mm will result in the supports under the R being too thick to remove. I position the text on top when printing and ironed the top layer as that has the most detail.
If you print this please tag me on Instagram as I would love to see how many people add this to their cube collection!
ShawnBoucke publiceert ook op
12 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
