speedloader pellets co2 gun diabolo

This is a speedloader for five Co2 pellet magazines. Printing and assembly:The whole model consists of three parts. All parts are on plate 4. (Plates 1-3 contain the parts individually. If you use plate 1 rotate the model, so that the flat side is on the bottom).It should be printed in PETG as PLA will probably break due to the pressure that needs to be applied. A screw and a nut are required, see pictures. The screw must be screwed through the opening, some force must be used, but this is intentional so that the hinge is not loose. After that the diabolos/pellets must be inserted, this is important so that the distance is correct. In the next step, the part that is supposed to press the diabolos/pellets in is placed on the diabolos and glued in place. I recommend hot glue as this makes it easier to correct the position. But double-sided tape or superglue or something similar will also work.<