Spherical dice with cheating function (Cheating not recommended!)

This is a variant on my original spherical dice.

It has 2 models: a “fair” one and one with a “cheat” function.

Both models are now cut between the markings on the surface. The disadvantage is that the inside is not as nice anymore, but I was still able to print this without supports. The outside looks slightly better now. The main reason was to provide the spaces for the magnets in the "cheat" version.

You need a ⅜" steel ball (or 9.5-10 mm) and for the "cheat" variant, 6 times 2 by 6 mm round magnets.

To be able to glue both halves properly aligned together I have in both halves designed 3 holes. Here you can stick in a small piece of filament (approx 2mm long) to line up the halves. Depending on your print etc, you might have to ream the holes with a 1.75 - 1.80 mm drill. (My design specifies a 1.85 mm hole).

Be sure to orient the .stl correctly on the build plate!

The “cheat” model has spaces to glue in small round 6 by 2 mm magnets. Be sure you put them in as d