Spice Rack

Printed using Standard .20mm profile - no supports. Adding supports more than doubles the print time. I added inner panels so the widest bridge span is about 50mm. I can see a couple of strings on the bottom and the top isn't perfectly flat, but the shelves are solid and the trays will cover most of it anyway.I've read that these printers should be able to cover a 120mm gap with some parameter tuning. The quality is good enough for me, but if it isn't for you, I would probably attempt tuning for the 50mm bridge since supports add so much time and material.It supports up to 4 shelves. It stops adding shelves when it encounters a zero width tray. The trays can be circular or rectangular - they slide onto the shelves. The widths are the inner widths, so a 60mm circular tray will actually hold a 60mm spice. Thus, if you were to measure a 60mm shelf width, it would actually be 62.6mm from wall to wall. Boost MeIf you like my design, please consider giving me a boost!