Slicer Discord
Spice rack – 3D-Druckmodell von Thingiverse Thingiverse

Spice rack

99 Downloads
51 Likes
0 Makes
Zum Modell
I designed “Spice rack”. The base of rack is 60x200 mm and the height is 150 mm. The rail for spice rack has base 63x260 mm. The rack is pull out and can be rotated 90 °, so there is easy access to the spices. The base is attached to the bottom shelf with six 3,5x16 mm wood screws. The bracket for lower rack must be glued and screwed on the lower rack. The lower and upper rack and cover are only assembled together.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
großer Druck
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 2/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Wood PLA
Mindest-Druckbett
200 mm (Groß)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen