Spider Man on a Ledge

Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right spot, I only post photos of the actual print and not the file they were generated from. If you want to make a request and/or get FREE *Patreon exclusive* models, members only models, and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D Instructions Can be rescaled just remember not to change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Space Gray Transmission Distance: 1.4 PLA Overture White Transmission Distance: 4 PLA Overture Red Transmission Distance: 8.2 PLA Overture White Transmission Distance: 4 Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Space Gray At layer #17 (1.44mm) swap to White At layer #21 (1.76mm) swap to Black At layer #22 (1.84mm) swap to Red At layer #29 (2.4mm) swap to White for the rest.