spiderman HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 158.61x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Prusament Royal Blue Transmission Distance: 0.8 PLA BambuLab Basic Red Transmission Distance: 4 PETG JAYO White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Royal Blue At layer #17 (1.44mm) swap to Red At layer #21 (1.76mm) swap to White for the rest. Commencer par le noir à la couche #9 (0.8mm) changer pour le bleu à la couche #17 (1.44mm) changer pour le rouge à la couche #21 (1.76mm) changer pour le blanc pour le reste