Spiderman POP (HueForge)

Project: spiderman pop.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6This print uses 6 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Red At layer #5 (0.48mm) swap to Black At layer #7 (0.64mm) swap to Marine Blue At layer #10 (0.88mm) swap to Yellow At layer #16 (1.36mm) swap to Gray At layer #18 (1.52mm) swap to White for the rest.