Spiderman portada Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 133.23x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 3.4mm and the Actual Depth is 2.8mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Numakers Fluorescent Green Transmission Distance: 6.4 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6 This print uses 7 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Fluorescent Green At layer #10 (0.88mm) swap to Blue At layer #12 (1.04mm) swap to Orange At layer #18 (1.52mm) swap to White At layer #24 (2mm) swap to White At layer #25 (2.08mm) swap to Red for the rest.