Spiderman VS Venom Hueforge

I used the same photo as Venom VS Spiderman by Remy DiTmy model is 200x200mm and spiderman is in red in this hueforge print Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.2mm and the Actual Depth is 3.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #19 (1.6mm) swap to Blue Gray At layer #20 (1.68mm) swap to Jade White At layer #26 (2.16mm) swap to Black At layer #32 (2.64mm) swap to Red for the rest.