Spinning Top

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.https://paypal.me/muddymaker I recommend using the .3mf for the complete print parameters. If you decide to print the .stl files, print the bottom half with supports from the build plate only. Use a box modifier (10.2mm squared) to block supports from filling the key hole. Print both the bottom half and the key with 100% infill. Print the top half with 2 perimeters/walls and 15% infill, no supports are needed for the top half.Once printed, press the key into the bottom half all the way, and then align the square key and press the top half onto the bottom half all the way. It should be a snug interference fit, no glue is required. Happy printing and spinning.