MakerWorld

Sculptures

Spiral trophy

by rodrigo.benenson · Sculptures

3 Downloads

2 Likes

2 Makes

This is a trophy cup I designed in ~1h in Womp. It was meant as a gift for a cousin (puzzle solver of the year).Here is the base model, that I customized with some text and logo for the recipient (in womp+tinkercad). Womp model available for remix: https://alpha.womp.com/preview/493714

Category

Sculptures

Source

MakerWorld

Published

04.01.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Spiral trophy need supports when printing?

No supports needed for Spiral trophy — it's designed to print clean off the bed.

How long does it take to print Spiral trophy?

According to the design notes, Spiral trophy takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Spiral trophy available in?

Spiral trophy is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Spiral trophy free to download?

Yes, Spiral trophy is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Spiral trophy

Similar Models

Add to Collection