Spiralize/Vase Mode Modular Drawers

I remixed these so I can print them in vase mode using a 1mm nozzle @ 0.8mm layer height as well as using a regular 0.4mm nozzle. The sleeve has also been resized to fit the length of the drawers properly. I've also made a larger version which is scaled to 130%.

I've added a back to the sleeve with a hex pattern to increase strength and stability while only using a small amount of material. The drawers won't ever slide out the back and the strength and rigidity increase is substantial.

If printing with a 1mm nozzle the sleeves will no longer be able to slot into each other(they work fine with a regular 0.4mm nozzle). I use a little glue to hold a bunch of these together. While not as convenient it does work fine and with the 1mm nozzle and vase mode I can print a sleeve and drawer in about 45 mins. If you need them to slot together, use a regular nozzle.

https://www.youtube.com/watch?v=O1DXVTyntgc



Files:
Tabbed_Drawer_Sleeve-RetromanIE-122mm.stl
70mm x 70mm x 122mm