Splitting Vise (No hardware needed, compact, smooth, and sturdy) – 3D printable model from MakerWorld

MakerWorld

Hand Tools

Splitting Vise (No hardware needed, compact, smooth, and sturdy)

by Ms · Hand Tools

554 Downloads

448 Likes

222 Makes

Go to Model

此模型是一个分型台钳，尺寸为：185*70*43mm，夹持范围：0-100mm，小巧实用型。它具有无需五金件、运行顺滑、坚固实用、无需支撑、夹持范围大的特点。特点：打印它您需要6h打印时长以及170g耗材使用量，因螺栓竖直打印，所以时间稍长一些。整体约18个零部件（右图），但组装简单，需要简单动手组装。所有部件打印无需支撑（但会提示无支撑，请无视它）。所有部件打印在滑动面上均无任何打印瑕疵，所以运行顺滑。所有部件公差经多次测试，默认设置打印无问题。主轴螺栓带限位，不会滑出，部件可替换。组装前请根据视频安装顺序，安装步骤有非常规步骤。组装注意事项： 1、先安装一侧，并安上限位销（限位销有一个圆面端，和背面贴合，请注意，如安反使用针挑出重新插） 2、安装另一个黑色部件，转动漏出槽口，按照上一步方法安装第二个限位销。（同样不要装反） 3、同样的操作安装第二个夹持面（外形相同），滑动底座打印完自带支撑，可轻松去除，可丢弃支撑模型，并安装背面限位销。 4、安装背面限位销，并旋入

Vise Table vise Small Clamps Clamp Home Clamping Tools 螺栓 Stress Relief Small diy Vise 夹子 Design Modern Garage Garden Workshop Studio Bambu

Category

Hand Tools

Source

MakerWorld

Published

28.06.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

large print · significant post-processing

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

185 mm (Large)

Est. print time

6 h

Post-processing

Sanding, Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Splitting Vise (No hardware needed, compact, smooth, and sturdy)?

Any FDM printer should handle Splitting Vise (No hardware needed, compact, smooth, and sturdy) just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 185 mm is recommended.

How long does it take to print Splitting Vise (No hardware needed, compact, smooth, and sturdy)?

According to the design notes, Splitting Vise (No hardware needed, compact, smooth, and sturdy) takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Splitting Vise (No hardware needed, compact, smooth, and sturdy) available in?

Splitting Vise (No hardware needed, compact, smooth, and sturdy) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Splitting Vise (No hardware needed, compact, smooth, and sturdy) free to download?

Yes, Splitting Vise (No hardware needed, compact, smooth, and sturdy) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL