MakerWorld

Other Miniatures

SpongeBob Head

by BigJoe Prints · Other Miniatures

37 Downloads

11 Likes

19 Makes

My first use of Substance 3D modeler. I have never used a 3d modeler software before so this may be rough around the edges but it was fun to Just see what it can do. Took about 2 hrs. Most of it was figuring out how to use it.

Category

Other Miniatures

Source

MakerWorld

Published

13.09.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does SpongeBob Head need supports when printing?

Yes, SpongeBob Head will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print SpongeBob Head?

According to the design notes, SpongeBob Head takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SpongeBob Head available in?

SpongeBob Head is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is SpongeBob Head free to download?

Yes, SpongeBob Head is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

SpongeBob Head

Similar Models

Add to Collection