Spooky house Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x111.98mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Protopasta Silver Smoke Grey Transmission Distance: 20 PLA Overture White Transmission Distance: 4.4 PLA BambuLab Basic Brown Transmission Distance: 2 PLA Overture Purple Transmission Distance: 1 PLA Overture Orange Transmission Distance: 7.1 PLA Overture Yellow Transmission Distance: 9.7This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Silver Smoke Grey At layer #10 (0.88mm) swap to White At layer #13 (1.12mm) swap to Brown At layer #18 (1.52mm) swap to Purple At layer #21 (1.76mm) swap to Orange At layer #24 (2mm) swap to Yellow for the rest.