Spool Rack Brackets for 1/2" EMT

Spool Rack made from printed brackets and ½" EMT Please read through this thoroughly before you begin. I needed more filament storage but didn't want to use up a ton of filament (and time) to make it. I created some brackets that use ½" EMT conduit as the vertical and horizontal pieces. If you don't have access to ½" EMT conduit, this project won't work for you. You could scale the brackets to fit whatever tubing, pipe, or wooden rods you do have available, but that's beyond the scope of what I have provided here and you are on your own. The printed brackets are 210mm (about 8.25" deep). You will need two support brackets for each horizontal shelf. You can fit 8 on a plate, and it will take about 12 hours to print. The 10" vertical spacing seems to be just about the perfect distance for BambuLab Sized spools. Using the EMT, the rack I created is 30" wide and about 7.5' tall. The shelves are vertically spaced every 10"The rack is stable to