Spoolholder for 32mm Pipe

This is a Spoolholder for a 32m pipe or bar to fit in a Filament-storage-box.
Its slightly angled so it will fit better in most Boxes.

Watch the printing Orientation!
The right way is the Bottom part down.
Please don´t try to print it as in the STL.
The .3mf is already in the right orientation and is recognized by most Slicers.

You will at least need two parts to hold one Bar.
It will fit 5mm screws with a nut.
To make the Box as airtight as possible just undersize the holes you drill in the box and force the screws in.
There is a small hole in the middle for easier positioning.