Spoolweight for new sunlu spools

This is a spoolweight for the new sunlu spools! It has a diameter of 60mm and is hollow so you can fill it with whatever you want e.g. gravel or sand. Recommended filament:PLA or PETG whatever you have handy Hotend: 0,40mm Print instructions for PLA (my print profile is set up like this):layer height 0,20mm3 wall loopstop/bottom shells 4 layerstop/bottom shell thickness 0,80mminfill 12%sparse infill pattern “gyroid”Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.Bad build plate adhesion is not related to the model. Take a look at my other models https://makerworld.com/en/u/1597610120Please leave me a like and a decent rating if you were satisfied, thank you in advance!