Thingiverse
Spotmicro - robot dog
von KDY0523
5.4k
Downloads
5.2k
Likes
17
Makes
I designed Spotmicro inspired by the Spotmini of Boston Dynamics.
It works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the regular file.
The ultra sonic sensor can be used for mapping or obstacle avoidance.
When you attach the servo horn to the 3D printed parts, you must use the HOTGLUE.
THERE IS NO CODE YET, SO YOU HAVE TO WRITE IT YOURSELF.
Assembly video part 1 : https://youtu.be/03RR-mz2hwA
Assembly video part 2 : https://youtu.be/LV5vvmhwtxM
Instagram : https://www.instagram.com/kim.d.yeon/
To make this, you need the following...
_Electronics_
12 × MG 996 R servo motor
1 × Arduino Mega
2 × HC-SR04 Ultrasonic sensor
1 × HC-06 Bluetooth module
1 × MPU-6050 Gyro sensor
1 × I2C 16x2 LCD Module
1 × Rleil rocker switch RL3-4
7.4v Battery
_Screws, Nuts and Bearings_
8 × 'M5×15'
40 × 'M4×20'
8 × 'M4×15'
48 × 'M
It works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the regular file.
The ultra sonic sensor can be used for mapping or obstacle avoidance.
When you attach the servo horn to the 3D printed parts, you must use the HOTGLUE.
THERE IS NO CODE YET, SO YOU HAVE TO WRITE IT YOURSELF.
Assembly video part 1 : https://youtu.be/03RR-mz2hwA
Assembly video part 2 : https://youtu.be/LV5vvmhwtxM
Instagram : https://www.instagram.com/kim.d.yeon/
To make this, you need the following...
_Electronics_
12 × MG 996 R servo motor
1 × Arduino Mega
2 × HC-SR04 Ultrasonic sensor
1 × HC-06 Bluetooth module
1 × MPU-6050 Gyro sensor
1 × I2C 16x2 LCD Module
1 × Rleil rocker switch RL3-4
7.4v Battery
_Screws, Nuts and Bearings_
8 × 'M5×15'
40 × 'M4×20'
8 × 'M4×15'
48 × 'M
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
