Thingiverse
Spray bottle actuator
door yattmaster
3
Downloads
1
Likes
0
Makes
This is an overcomplicated way to water plants. Instead of a 50 cent aliexpress motor I used a larger motor(I don't know where it came from but I can give you the part number if you're really dedicated to finding one and making this) with lots of torque to pull the handle of the spray bottle. It also has a nozzle attachment to attach an extension hose.
An arduino triggers a relay every 12 hours for 5 seconds connected to a 28v DC adapter which powers the motor.
A cam fitted over the existing gear on the motor pulls a wire which is attached to the handle of the water bottle. It's quite mesmerizing to watch, I can provide a video if requested.
Has a spot to hold the motor and the opposite end has a spot for the relay and the arduino, fitted for my arudino case which you can find on my page as well.
Printed in PETG.
An arduino triggers a relay every 12 hours for 5 seconds connected to a 28v DC adapter which powers the motor.
A cam fitted over the existing gear on the motor pulls a wire which is attached to the handle of the water bottle. It's quite mesmerizing to watch, I can provide a video if requested.
Has a spot to hold the motor and the opposite end has a spot for the relay and the arduino, fitted for my arudino case which you can find on my page as well.
Printed in PETG.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!