'Spresso Go Round

Ferris Wheel for your Nespresso PodsThis is a fun way to store your Nespresso Pods and makes it easy to see which flavours are available. This includes two optional cup holders that can be clipped onto the sides. The cup holders have removable drip trays that can be washed easily if your cup drips a bit.I have included multiple options for the crossbar sizes. It is important that you get this right so I recommend printing one of each crossbar as well as the SpressoGoRound-Bushing.stl and checking which fits best for your printer. The fit doesn't need to be tight, you should be able to get the bushing onto the crossbar without using force. For PLA on my K1C, SpressoGoRound-CrossBar36.stl works best.1x SpressoGoRound-FrameBack.stl has a single bridging layer to support the counterbored holes - I just punched through this with the screws provided, but if you are printing out of a really tough material you might need to use a drill or screwdriver to clear the bridging layer.If you are printing the cup holders + drip trays, print the drip trays out of something heat-resistant since you will be placing a hot coffee on there. I printed mine out of ABS.You can check the attached .3mf file for the print settings I used, but if you want to slice your own way you will need to print the following:For the Wheel:2x SpressoGoRound-Wheel.stl1x SpressoGoRound-FrameScrewBack.stl1x SpressoGoRound-FrameScrewFront.stl1x SpressoGoRound-Spacer.stlFor the Frame:1x SpressoGoRound-FrameFront.stl1x SpressoGoRound-FrameBack.stl4x SpressoGoRound-Screw.stlFor the Gondolas:12x SpressoGoRound-GondolaBody.stl12x SpressoGoRound-GondolaRing.stl12x SpressoGoRound-CrossBar.stl (Check which size works best for you)12x SpressoGoRound-Bushing.stl24x SpressoGoRound-CrossBarSpacer.stlFor the Cup Holders:2x SpressoGoRound-CupHolder.stl2x SpressoGoRound-DripTray.stl (Print these in heat resistant material)I have added some gifs that show how to assemble the model. Start with the wheel, then add it to the fram