Thingiverse
Spring loaded CNC pen holder
por FritzPeppone
21
Descargas
10
Likes
0
Makes
Spring-loaded pen holder for pens with a max. diameter of 11mm.
The mounting points are designed to work with my Kress/AMB spindle mount:
https://www.thingiverse.com/thing:4663262
Additionally necessary:
3 x M3 threaded inserts
3 x long M3 screws
3 x pen spring
The pretension of the springs can be adjusted with the screws
Attention!
This design requires threaded inserts. I am using M3 Ruthex threaded inserts, therefore all holes for inserts have a diameter of 4mm. If you are using different inserts, check if they fit. If not, either drill the holes wider or modify the stl file accordingly.
The mounting points are designed to work with my Kress/AMB spindle mount:
https://www.thingiverse.com/thing:4663262
Additionally necessary:
3 x M3 threaded inserts
3 x long M3 screws
3 x pen spring
The pretension of the springs can be adjusted with the screws
Attention!
This design requires threaded inserts. I am using M3 Ruthex threaded inserts, therefore all holes for inserts have a diameter of 4mm. If you are using different inserts, check if they fit. If not, either drill the holes wider or modify the stl file accordingly.
FritzPeppone también publica en
41 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
