Thingiverse

Spring-loaded scribe for MakerFarm I3

von Jhupp

14 Downloads

9 Likes

0 Makes

This is a spring loaded scribe for the MakerFarm Prusa I3 x-carriage. I use this to remove the etch resist when fabricating printed circuit boards.

The body of the scribe is printed. A 1/4" diameter grade 8 bolt is used to make the scribe, and 1/4" T-nut and spring are used to hold the bolt in place. Both are housed in the upper portion of the body. A single machine screw holds the scribe in place on the x-carriage.

circuit board makerfarm makerfarm i3 MakerFarm Prusa i3 printed circuit printed circuit board scribe spring loaded scribe springloaded scribe circuit board makerfarm makerfarm i3 MakerFarm Prusa i3 printed circuit printed circuit board scribe spring loaded scribe springloaded scribe circuit board makerfarm makerfarm i3 MakerFarm Prusa i3 printed circuit printed circuit board scribe spring loaded scribe springloaded scribe

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat