Sprinkler for Plants

This is a 3D Sprinkler designed to water your potted plants. Just place the sprinkler around it without having to uproot your plant, as it is cut at an angle of 30 degrees.

Video link: https://youtu.be/y1kl_0LNISU

Walls of sprinkler are 2 mm thick, and it has 13 holes of 0.8 mm diameter for the spray pattern.

The inbuilt nozzle is for taking water in through a pipe that fits on top of it. It has a hole from where it is connected to the sprinkler body. It is designed to provide a more tighter fit to the water pipe which tends to slip away.

Both hose and sprinkler tube can be printed and used separately. Hole in sprinkler body is 4.5 mm in diameter.

Bigger outer diameter: 7.1 mm
Smaller outer diameter: 5.9 mm
Inner diameter (hole): 3.9 mm
Height of overall hose: 15 mm

The inner diameter and outer diameter of the sprinkler are 185 mm and 202.6 mm respectively.