Thingiverse
SquadV2 Pigtail mount
par theswedishbear
1
Téléchargements
0
Likes
0
Makes
A top-mounted, pigtail mount for the SquadV2.
**Hardware:**
2x M3 nuts
4x M3 screws
1x Pigtail with screw mount
**Assembly:**
Insert the nuts into the 2 slots one from each side.
Insert the pigtail into the big slot. at the back.
Screw in the pigtail with 2 M3 screws.
Lastly, screw it into the top plate with the last 2 screws.
**Notes:**
The screwsI used was 4 screws I had leftover from the frame build.
When printing use at least 3 layers and no less than 5% infill.
**Hardware:**
2x M3 nuts
4x M3 screws
1x Pigtail with screw mount
**Assembly:**
Insert the nuts into the 2 slots one from each side.
Insert the pigtail into the big slot. at the back.
Screw in the pigtail with 2 M3 screws.
Lastly, screw it into the top plate with the last 2 screws.
**Notes:**
The screwsI used was 4 screws I had leftover from the frame build.
When printing use at least 3 layers and no less than 5% infill.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
