Squid Game Guards

Project: 123.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x155.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Pink At layer #23 (1.92mm) swap to White for the rest.